This website does not provide specific medical advice, and is not engaged in providing medical services. Information on this website does not replace consultation with qualified health or medical professionals who see you in person, for your health and your medical needs.  Please see a physician or health professional immediately if you suspect you may be ill or injured.

----------------------------

Printable Version : 2010 WittFitt Safety & Use Guidelines

-----------------------------

READ CAREFULLY BEFORE EACH USE OF THE

WITTFITT BALL WITH LEGS DIAM. CM. 35-42-55-65-75
DIRECTIONS AND WARNINGS

This document is the essential guide for the proper and safe usage of the ball: it contains the necessary information in order to use the product with full satisfaction and in the respect of the safety rules during the life of the product itself and/or its parts.

PROVIDED USAGES - LIMITS AND EXCLUSIONS

1. This ball has been designed and arranged to be used in various fields, such as sports, fitness, gymnastics but also in medical and educational settings. It must not be used for different purposes other than the ones stated by WittFitt LLC..

2. This ball can bear up to 400 kg (880 lbs) weights.

3. IT IS NOT A TOY and, in any case, it' s not suitable for children under 36 months : small parts included. Choking hazard.

4. DO NOT perform exercises with barbells, dumbbells or any kind of weights on the ball.

PACKAGE CONTENT

5. The package contains a ball and two white plugs.

INFLATION

6. To inflate the ball, an air pump or air compressors must be used. DO NOT inflate by mouth.

FIRST USAGE: MODE AND PROCEDURE TO FOLLOW

7. By first usage, proceed in accordance to the following directions:

7.1) start to inflate the ball slowly, with the above mentioned tools, having a break sometimes.

7.2) don't exceed the 90% of the maximum diameter, indicated on the ball itself and/or on the packaging.

7.3) close the hole with one of the two provided white plugs ( the second plug is a spare).

7.4) wait 24 hours before inflating it to its maximum diameter and start to use it.

DIRECTIONS AND WARNINGS FOR THE FOLLOWING INFLATIONS

8. For the following inflations, never exceed the prescribed and indicated

maximum diameter. If an air compressor is used, proceed slowly while approaching the prescribed maximum diameter. The plug can be removed using a coffee spoon.

PRECAUTIONS TO ADOPT BEFORE EACH USAGE

9. Before each use, check the surface of the ball and don't use it if it shows cuts, abrasions, holes or any other kind of damage. In all these cases, the safety of the ball is compromised and the ball itself could instantly tear, causing the user possible injuries.

10. Wash the ball with water and mild dishwashing liquid and remove the more obstinate stains with diluted rubbing alcohol.

USAGE TEMPERATURE

11. Caution: the ball must be kept at room temperature (18 - 20°C). In case of particularly low temperature, proceed with inflation only after letting the ball reach the above mentioned room temperature.

USED SURFACES

12. The ball must be used INSIDE on soft surfaces, such as carpets, rugs, exercise mats. Never use the ball in presence of sharp objects or close to heating elements; when not in use, never leave the ball directly exposed to the sun.

REPAIR WARNINGS

13. If the ball shows holes or cuts, don't try to repair it: self made repairs invalidate the integrity of the product causing serious risks for the safety and health of the user.

TRACEABILITY:

14. A traceability code is marked on the ball, close to the plug. This code is necessary in the case of a claim, to identify the production time and the batch materials.

DISCLAIMER
15. The manufacturer and WittFitt LLC decline any liability for damages to persons, animals, objects or to the environment arising from the use of any of our products.

NOTE
16. Colors and decorations may vary according to manufacturer.

Address details to keep:
WittFitt LLC - P.O. Box 821 - Hudson, WI 54016 - U.S.A.
V: 1 (515) 720 4153 - F: 1 (715) 377 8217 - www.wittfitt.com

Manufactured under Quality System Certification ISO 9001:2008 MADE IN ITALY